Dynamic Carbon Pro

Use Dynamic's Carbon Assembly Paste when you're mounting carbon or aluminium parts such as seat posts and stems. The small grains in the paste prevent the parts from loosening. The torque required for tightening is reduced by up to 30%, which makes cracks in the carbon a thing of the past.

The Carbon Assembly Paste also offers protection against corrosion and prevents creaking noises. You'll love it, because a little creak in your frame can drive you absolutely crazy!

Make sure you reduce your original torque by 30%. The paste already provides better grip.

Can I use ordinary mounting paste on my carbon parts?
No, we do not recommend this! Carbon paste is made especially for carbon, which is more vulnerable to over-tightening. It provides extra friction without damaging the carbon, so the part stays tight and doesn't creak. Carbon paste ensures that you won't need to exceed the tightening torque, and that your parts remain fixed for a long time.

How do I use carbon paste?
Assembly grease should be applied to the component to be assembled and to the threads of bolts. If the component is made of carbon, then carbon paste should be used, otherwise ordinary assembly grease will do. You can apply it with a brush, directly from the tube or just with your fingers. In principle, you use carbon paste on all bolts with a thread and are most used on (carbon) stems and (carbon) seatposts. Re-apply when you have loosened a component. It is also advisable to loosen the parts once in a while, clean them and apply new paste.